Front Left Bezel - HP ProLiant DL385 G7 Maintenance And Service Manual

Remove the Systems Insight Display.
7.
To replace the component, reverse the removal procedure.

Front left bezel

To remove the component:
Power down the server (on page 26).
1.
Extend or remove the server from the rack
2.
server from the
Remove the access panel
3.
Remove the PCI riser cage
4.
Remove the air baffle
5.
Extend or remove the Systems Insight Display
6.
Disconnect the System Insight Display cable from the system board.
7.
rack" on page 27).
("Access panel" on page 33).
("PCI riser cage" on page 43).
("Air baffle" on page 53).
("Remove the server from the
("Systems Insight Display" on page 67).
Removal and replacement procedures 68
rack" on page 27, "Extend the