Install the HP Smart Storage Battery on the server.
7.
Install the access panel (on page 25).
8.
Do one of the following:
9.
Slide the server into the rack.
o
Install the server into the rack
o
Power up the server (on page 20).
10.
Optical drive cage option
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (http://www.hp.com/go/qs).
To install the component:
Power down the server (on page 20).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 20).
o
Remove the server from the rack (on page 22).
o
Remove the access panel (on page 24).
4.
("Installing the server into the
rack" on page 36).
Hardware options installation 70