Software and Hardware
Software
ChartViewNET
PostView
ScanCal
CIMScan
ScanServer
16-Channel Signal Conditioning Cards (Optional)
Low-voltage
with removable
terminal block input module
Low-voltage
with BNC input
module
Low-voltage
with safety jack
input module
Isolated TC/voltage
plug type input module
Isolated high-voltage
safety jack input module
Cables
CA-47,
Computer-to-NetScan Cable
PC/AT/XT serial port (9- & 25-pin sub D) to NetScan (9-pin
sub D) RS-232/422 cable, 6 ft.
CA-192-5
, 10-Base-T "straight-through" ethernet cable, 5ft.
CA-192-Adapter
Additional Hardware Options
4-slot expansion chassis
Memory expansion options:
1 Mbyte, 4 Mbyte, or 8 Mbyte
16 output CSN/Relay card
NetScan Specifications
If equipment is used in any manner not specified in this manual, or if specification limits
are exceeded, the function of the equipment, as well as the protection provided by it,
may be impaired.
NOTE: Specifications for signal conditioning cards and for the NetScan Expansion Chassis appear in their
respective sections of this manual.
Measurement Parameters
A/D resolution
Accuracy (with type J TC)
TCs supported
DCV
ACV
Ch-to-ch isolation
Ch-to-system isolation
AC line rejection
Scanning Parameters
Switching Technology
Max scan rate
Max single-ch scan rate
NetScan User's Manual
(optional)
(optional)
(CSN14/LV/T)
(CSN14/LV/B)
(CSN14/LV/S)
(CSN14/TC/P)
with
(CSN14/HV/S)
with
, 10-Base-T ethernet "cross-over" adapter
16 bit w/over sampling
± 0.5°C
J,K,T,E,R,S,B,N
3
3
500 V or 200 V
500 V
3
mechanical relays
147 chs. per sec.
20 Khz
General Information and Specifications
3-3