Omega Engineering OMB-NETSCAN 1500 User Manual page 179

Appendix A
The following table summarizes terminator usage with all possible commands in ASCII mode (no terminators are
used in binary mode), where X indicates that the terminator is asserted at the end of the response, O indicates
that the terminator is asserted within the response to separate channel and scan readings, and a blank cell
indicates that the terminator does not affect the command:
EXAMPLE
PRINT#1,"C1-4,1X"
PRINT#1,"F0,0X"
PRINT#1,"Q7,7,0,0,0X"
PRINT#1,"Q?X"
LINE INPUT#1,A$
PRINT A$
PRINT#1,"U13X"
INPUT#1,A$
PRINT A$
INPUT#1,A$
PRINT A$
INPUT#1, A$
PRINT A$
INPUT#1,A$
PRINT A$
PRINT#1,"Q7,0,0,0,0X"
PRINT#1,"U13X"
LINE INPUT#1, A$
PRINT A$
NetScan User's Manual
Command
resp
R1X
R2X
R3X
R#chanX
R#first-lastX
U4X
U5X
U13X
All others X
Argument
hll scan block
X
O X
O X
X
O X
O X
O X
O X
' Configure four channels for T/C Type J
' Configure engineering units, degrees C
' Set the resp and hll
the scan and block
' Get the current query terminators
' Screen shows Q07,07,00,00,00
' Request the last readings
' Get reading for channel 1
' Screen shows +0104.20
' Get reading for channel 2
' Screen shows +0010.40
' Get reading for channel 3
' Screen shows -0064.10
' Get reading for channel 4
' Screen shows
+0006.30
' Set the resp terminator to
scan and block terminators to None
' Request the last readings
' Get readings for channels 1 - 4.
' Screen shows...
+0104.20
+0010.40
-0064.10
+0006.30
API Command Reference
sep
O
O
O
terminators to LF/EOI , and
terminators to None
LF/EOI and the hll ,
A-39