ScanCal Software Application
ScanCal's Main Window
Select the ScanCal option from the ChartView Program Group. ScanCal's Main Window will appear. The
window contains pull-down menus, a toolbar, and calibration instructions.
The options available from the pull-down menus (
offered by the toolbar, with one exception: the
Upload Cal Constants
NetScan User's Manual
Unless you are setting main unit calibration constants or changing the password,
the calibration mode should be disabled.
The calibration mode applies to main unit calibration, and not to the calibration of
signal conditioning cards.
.
ScanCal Main Window and Icon Legend
ScanCal Main Window Pull-Down Menus
, and
File, Instrument
Calibrate
Calibrate
pull-down menu contains a selection to
) are the same as those
Calibration 6-3