Omega Engineering OMB-NETSCAN 1500 User Manual page 25

2. Configure Chart Setup
◊
(4) On the Select Interface box, shown in step 1, click "OK." A Chart Setup Wizard window appears (see
following figure).
Note:
The chart setup determines how your ChartView Main Window will appear in regard to the number of
groups available for viewing, the number of charts shown for each selected group, and the number of
overlapping channels in each chart (not to exceed 4). As stated in the previous note, only ChartView Plus
allows the use of multiple groups and overlapping channels.
You can choose to manually create a configuration, or have one created automatically. In addition, you can
use Chart Setup Wizard to make a rough display configuration, and then manually fine tune it. The
automatic setup method offers three choices: Simple, Moderate, and Advanced.
The "Manual Chart Creation" option provides you with the same capabilities as the Advanced Automatic
Setup selection, but allows you to vary the number of assigned channels per chart, as well as vary the
number of charts per group.
Setup Type
Simple
Moderate*
Advanced*
*Moderate and Advanced modes are only available with activation of ChartView Plus.
NetScan User's Manual
Chart Setup Wizard
ChartView Plus has Chart Setup Wizard options including Moderate and Advanced Automatic
Chart Creation, as well as the ability to create multiple groups. ChartView Plus features can be
unlocked by use of an authorized registration ID number as an unlock code. Contact your service
representative for more detailed information.
Chart Setup Wizard, Automatic Options
Group Setup Chart Setup
1 group only Up to 16 charts
1 group only Up to 16 charts
Up to 64 groups Up to 16 charts per group
Channel Setup
1 channel per chart
Up to 4 overlapping channels per chart
Up to 4 overlapping channels per chart
ChartView Quick Start and Tutorial 2-7