Digital Input Stamping (I - Omega Engineering OMB-NETSCAN 1500 User Manual

Configuration Aspects for Programmers
With Alarm Stamping:
PRINT#1, "A#1X"
PRINT#1, "R1X"
LINE INPUT#1, A$
PRINT A$
....+0234.20-0019.40+0001.40+0023.60 005 128 032 066
Digital Input Stamping ( I# )
Digital Input Stamping (
the scan. This is accomplished by a digital input "ON" (1) or "OFF" (0) code appended to the scan in real time.
Digital Input Stamping can be enabled with the
there are 8 digital inputs.
Note: Digital Input Stamping is not valid in high-speed, single channel mode (burst mode).
Examples of
I#
Without Digital Input Stamping (default):
PRINT#1, "I#0X"
PRINT#1, "R1X"
LINE INPUT#1, A$
PRINT A$
....+0234.20-0019.40+0001.40+0023.60
C-16
' Enable alarm stamping
' Configure and start an acquisition
' Request the next scan in the buffer
' Retrieve it
'
) allows you to see whether a digital input was "active" or "inactive" at the time of
I#
command follow.
command and disabled with the
I#1
' Disable digital input stamping
' Configure and start an acquisition
' Request the next scan in the buffer
' Retrieve it
'
Appendix C
command. Note that
I#0
NetScan User's Manual