Omega Engineering OMB-NETSCAN 1500 User Manual page 169

Appendix A
TYPE
EXECUTION
SYNTAX
DESCRIPTION
The Digital Input Stamping (
scan as it occurs in real time.
The digital input state consists of 8 bits (
where "1" indicates digital input "on" and "0" indicates digital input "off."
In binary mode, 2 bytes will be appended as follows: Byte 2: 00h,
In ASCII mode, 8 bytes will be appended as follows:
Where
Note: If Alarm Stamping (
EXAMPLES
Without Digital Input Stamping (default):
PRINT#1, 'I#0X"
PRINT#1, "R1X"
LINE INPUT#1, A$
....+0234.20-0019.40+0001.40+0023.60
With Digital Input Stamping:
PRINT#1, "I#1X"
PRINT#1, "R1X"
LINE INPUT #1, A$
....+0234.20-0019.40+0001.40+0023.60 036 000
NetScan User's Manual
I# - Digital Input Stamping
System
Deferred
I#state
Specify whether or not digital input stamping will be enabled.
I# ) command, when enabled, will append the digital input state to the end of each
= User Terminator, and
D XXX
) is also enabled, the Digital Input Stamp (
A#
Alarm Stamp.
have either of the following values: The default of
1
input stamping, or to enable digital stamping.
through ). Each bit has an assigned binary value of "1" or "0,"
I8 I1
I8 - I1
DXXXD000
= the decimal equivalent of
' Disable digital input stamp
' Configure and start an acquisition
' Request the next scan in the buffer
'
' Enable digital input stamping
' Configure and start an acquisition
' Request the next scan in the buffer
API Command Reference
0
, which disables digital
I8 - I1 .
) will be appended after the
I#
state
may
A-29