Omega Engineering OMB-NETSCAN 1500 User Manual page 138

Expansion Chassis Specifications
Service must be performed by qualified personnel. All terminals, including the AC line and
analog inputs, must be disconnected prior to opening NetScan main unit or expansion
chassis casing. Internal voltage potentials exist which could cause bodily injury or death!
The Expansion Chassis contains no fuses; However, fuse failure in NetScan's main chassis
indicates a possible problem with device circuitry. If a fuse blows, contact a qualified
service representative. Replacement fuses are to be installed by qualified service personnel
with the unit disconnected from the NetScan unit and with all other terminals disconnected.
If the line voltage selector is changed, then the fuse designated for that line voltage must be
used.
Installation Category:
•
CE: Category 2 for Line Voltage Input terminal.
All other terminals are Category 1.
Number of Slots: Four (4).
Channel-to-Channel Isolation:
Channel-to-System Isolation:
Dimensions:
•
330 mm wide x 241 mm deep × 152 mm high (13" × 9.5" × 6").
Weight:
• ≈ 1.8 kg. (4 lbs.) empty
Operating Environment:
•
Standard: Indoor use, 0 to 50°C;
0 to 95% RH (non-condensing) to
35°C; linearly derate 3% RH/°C
from 35 to 50°C.
Power:
Receives power from main NetScan unit
7-20
200 V peak, with CSN14/HV/S 500 V peak
500 V peak
•
CE: Indoor use at altitudes below
2000 m, 5 to 40°C; 0 to 80% RH
up to 31°C decreasing linearly to
50% RH at 40°C.
NetScan User's Manual