Adjusting The Basic Position Of The Hand Brake Lever; Checking The Free Travel Of The Foot Brake Lever - KTM 990 Supermoto R Owner's Manual

MAINTENANCE WORK ON FRAME AND ENGINE

Adjusting the basic position of the hand brake lever

9.22

Checking the free travel of the foot brake lever

9.23
Warning
Danger of accidents Brake system failure.
–
If there is no free travel on the foot brake lever, pressure builds up on the rear brake circuit. The rear brake can fail due to over-
heating. Adjust free travel on foot brake lever according to specifications.
–
Pull the brake lever forwards.
–
Adjust the basic setting of the hand brake lever to your hand size by turning adjusting
wheel .

Info
Do not make any adjustments while riding!
700549-10
–
Move the foot brake lever back and forth between the end stop and the contact to the
piston rod and check free travel
Guideline
Free travel at foot brake lever
Info
The piston rod should not move.
» If the free travel does not meet specifications:
600921-10
.

3... 5 mm (0.12... 0.2 in)
79