Table of Contents
Advertisement
MAINTENANCE WORK ON FRAME AND ENGINE
Info
The spring preload defines the initial situation of the spring process on the shock absorber.
The spring preload setting is optimal when it is set for the weight of the rider and that of any baggage and a passenger, and thus
ensures a compromise between maneuverability and stability.
Before changing the spring preload, make a note of the present setting, e.g., by measuring the length of the spring.
–
Take the weight off the rear wheel and swingarm.
Info
The spring preload can be adjusted correctly only if the rear wheel and the
swingarm are fully relieved of weight.
–
Loosen locking ring
–
Turn adjusting ring
Hook wrench (T106S)
–
Measure the overall spring length without a load.
–
Tension the spring by turning adjusting ring
Guideline
(Supermoto R)
Spring preload
700651-01
Comfort
Standard
Sport
Full payload
.
until the spring is no longer under tension.
to the prescribed value.
11 mm (0.43 in)
11 mm (0.43 in)
11 mm (0.43 in)
13 mm (0.51 in)
70
Advertisement
Table of Contents
