KTM 990 Supermoto R Owner's Manual page 129

MAINTENANCE WORK ON FRAME AND ENGINE
All black ignition keys are deactivated.
–
Order a new black ignition key according to the key number on the KEYCODECARD
and activate it.
Activating the ignition key:
–
Press the emergency OFF switch into the position
–
Insert the orange programming key in the ignition lock.
–
Switch on the ignition by turning the orange programming key to the ON position
FI Warning lamp
Immobilizer indicator lamp
–
Switch off the ignition by turning the orange programming key to the OFF position
–
Pull out the programming key.
–
Insert the black ignition key in the ignition lock.
–
Switch on the ignition by turning the ignition key to the ON
FI Warning lamp
Immobilizer indicator lamp
again.
–
Switch off the ignition by turning the ignition key to the OFF
–
Remove the black ignition key.
–
To activate further ignition keys, repeat the last 4 steps with the respective ignition
key.
–
Insert the orange programming key in the ignition lock.
–
Switch on the ignition by turning the orange programming key to the ON position
FI Warning lamp
Immobilizer indicator lamp
number of flashes equals the number of functional black ignition keys includ-
ing the orange programming key.
.
(MIL) lights up, switches off, and then starts to flash.
lights up.
(MIL) lights up, switches off, and then starts to flash.
lights up, switches off briefly, and lights up
(MIL) lights up, switches off, and then starts to flash.
lights up, switches off briefly and flashes; the
127
.
.
position.
position.
.