Running In The Engine - KTM 990 Supermoto R Owner's Manual

GENERAL TIPS AND HINTS ON PUTTING INTO OPERATION
Info
When using your vehicle, remember that others may feel disturbed by excessive noise.
–
Make sure that the pre-delivery inspection work has been carried out by an authorized KTM workshop.
You receive a delivery certificate and the service record at vehicle handover.
–
Before your first trip, read the entire operating instructions carefully.
–
Get to know the controls.
–
Adjust the basic position of the clutch lever. (
–
Adjust the basic position of hand brake lever. (
–
Get used to handling the vehicle on empty suitable terrain before making a longer trip. Try also to ride as slowly as possible to get a
better feeling for the motorcycle.
–
Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.
–
Run the engine in. ( p. 41)

Running in the engine

6.2
–
Do not exceed the specified engine speed and load during the running-in period.
Guideline
Maximum engine speed
During the first: 1,000 km (621.4 mi)
After the first: 1,000 km (621.4 mi)
–
Avoid full-throttle operation!
p. 141)
p. 79)
6,500 rpm
9,500 rpm
41