MAINTENANCE WORK ON FRAME AND ENGINE
Adjusting the basic position of the clutch lever
9.64
Info
Turn the adjusting screw clockwise to increase the distance between the clutch lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease the distance between the clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
–
Position the mask spoiler.
–
Mount and tighten screws
700632-10
–
Mount and tighten screws
–
Repeat the operation on the opposite side.
700634-10
.
.
141