MAINTENANCE WORK ON FRAME AND ENGINE
Checking the play in the throttle cable
9.66
–
Remove screws
–
Remove cover
–
Check the fluid level.
Fluid level below top edge of container
»
If the coolant level does not meet specifications:
–
Correct the fluid level of the hydraulic clutch.
Hydraulic fluid (15) (
700606-01
–
Position the cover with the membrane. Mount and tighten the screws.
–
Move the handlebar to the straight-ahead position. Move the throttle grip backwards
and forwards to ascertain the play in the throttle cable.
Play in throttle cable
»
If the throttle cable play does not meet specifications:
–
Adjust the play in the throttle cable.
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may result
in unconsciousness and/or death.
400192-10
–
When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in an enclosed space without an effective
exhaust extraction system.
–
Start the engine and let it run idle. Move the handlebar to and fro over the entire steer-
ing range.
The idle speed must not change.
.
with membrane
.
p. 189)
4 mm (0.16 in)
3... 5 mm (0.12... 0.2 in)
(
p. 144)
x
143