MAINTENANCE WORK ON FRAME AND ENGINE
(Supermoto T)
–
Remove the cover.
Info
For purposes of illustration only, the following steps are shown with the
headlight mask removed for this model. Removal is not necessary.
700604-01
–
Disconnect plug-in connector
–
Remove rubber cap
700592-10
–
Push off retaining clamp
–
Remove headlight bulb
–
Position the new headlight bulb in the headlight housing.
Low beam/high beam (H4/socket P43t) (
Info
Insert the headlight bulb so that the bayonet lugs latch into the slots.
700593-01
.
.
on both sides, squeeze and fold down.
.
p. 177)
108