MAINTENANCE WORK ON FRAME AND ENGINE
Changing the parking light bulb
9.47
Note
Damage to reflector Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Position the headlight mask. Mount and tighten screws
Guideline
Remaining chassis screws
B00137-11
(Supermoto T)
–
Mount the cover.
–
Check that the lighting is functioning properly.
700604-01
–
Switch off all power consumers and the engine.
.
M6
10 Nm (7.4 lbf ft)
110