KTM 990 Supermoto R Owner's Manual page 94

MAINTENANCE WORK ON FRAME AND ENGINE
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is broken or worn:
–
Replace the wheel bearing.
–
Remove bushing
and the shaft seal rings.
Long-life grease (
–
Fit the bushings.
–
Clean and grease the thread of the wheel spindle and nut.
700661-01
Long-life grease (
–
Clean the fixing locations on the brake caliper support and swingarm.
x
and bushing . Clean and grease the roll surfaces of the bushing
 
p. 192)
p. 192)
92