Table of Contents
Advertisement
MAINTENANCE WORK ON FRAME AND ENGINE
Removing the seat
9.38
Mounting the seat
9.39
–
Mount the dust cap.
Info
The rubber seal in the dust cap prevents air leaking out of the tire if the valve is
defective.
–
Insert the ignition key in the seat lock
–
Raise the rear of the seat, push it towards the rear, and remove it upwards.
–
Remove the ignition key from the seat lock.
600922-10
–
Position front recesses
the rear and simultaneously push it forward. Both lugs
locking bolt
The seat engages with an audible click.
–
Finally, check that the seat is correctly mounted.
B00136-01
of the seat on the oval head screws of the fuel tank, lower
must be inserted into the lock housing.
and turn it clockwise.
must hook into the frame and
97
Advertisement
Table of Contents
