MAINTENANCE WORK ON FRAME AND ENGINE
Removing the rear wheel
9.33
Guideline
Screw, front brake caliper
–
Remove the fixation of the hand brake lever.
–
Take the front from the work stand. (
–
Take the rear from the work stand. (
–
Pull the front brake and compress the fork powerfully a few times.
The fork legs straighten.
–
Fully tighten screws
Guideline
Screw, fork stub
700640-11
x
–
Jack up the motorcycle at the rear. (
–
Remove nut
–
Pull out wheel spindle
with the adjusting screw.
B00134-10
M10x1.25
p. 58)
p. 59)
.
p. 59)
. Remove chain adjuster
to the point where the chain adjuster is no longer in contact
45 Nm
Loctite
(33.2 lbf ft)
M8
15 Nm
(11.1 lbf ft)
.
90
®
243™