12 SERVICE WORK ON THE CHASSIS
12.43
12.44
90
V00461-10
W00326-10
Programming the quickshifter (All special models)
Info
If the shifting performance of the quickshifter starts to decrease, it must be reprogrammed.
F03760-12
Adjusting the basic position of the clutch lever
W00307-10
(All special models)
–
1
Check that screw
Guideline
Screw, fixed
M4
grip
A
Diamond
must be located at the top.
(350 XW‑F US)
–
1
Check that screw
Guideline
Screw, fixed
M4
grip
A
Diamond
must be located at the top.
–
Carry out start procedure. (
–
Press and hold the QS button
The QS indicator lamp flashes.
–
Pull the clutch lever, engage first-gear and hold the shift lever
all the way down.
–
Briefly press the QS button
The QS indicator lamp lights up blue, the teaching proce-
dure was successful.
Info
If the quickshifter cannot be activated, the teaching
procedure was unsuccessful and must be repeated.
–
Adjust the basic position of the clutch lever to your hand size
by turning adjusting screw
is firmly seated.
5 Nm (3.7 lbf ft)
Loctite
is firmly seated.
5 Nm (3.7 lbf ft)
Loctite
p. 41)
1
for at least 10 seconds.
1
.
1
.
®
243™
®
243™