15
ELECTRICAL SYSTEM
15.10
Changing the parking light bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
Preparatory work
–
Switch off the ignition by turning the ignition key to the position
–
Remove the headlight mask with the headlight. (
Main work
–
Pull cable sleeve
–
Remove the bulb.
–
Position a new light bulb in the socket.
Parking light (W5W / socket W2.1x9.5d) (
–
Carefully position socket
–
Mount cable sleeve
V00071-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
1
and the socket of parking light
2
with the bulb in the housing.
1
.
p. 147)
.
p. 139)
2
carefully out of the housing.
p. 186)
p. 140)
145