Remote Access - VTech VS150 TWIN User Manual

RemOTe aCCeSS

A two-digit security code is required to access the messages, or
change the sensor mode setting remotely, from any touch-tone
telephone. The preset code is 19. You can use this preset code, or
set your own.
1. Dial your telephone number from any touch-tone telephone.
2. When the system plays your announcement, enter the two-digit
security code.
Enter the one of the remote commands, # or *, to listen to
3.
message or change the sensor mode .
Command
#
*
To listen to messages (see page 83).
To change the sensor mode (see page 84).
82
Description