Related Manuals for VTech VS112-2
Summary of Contents for VTech VS112-2
- Page 1 112-2 112-27 112-3 112-37 112-4 112-47 Click on the in the manual to watch the video tutorials. User’s manual Scan the QR code to go and subscribe our tutorial channel...
- Page 2 VTech telephone. Please review this manual thoroughly to ensure proper installation and operation of this innovative and feature rich VTech product. For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com. In Canada, please visit phones.vtechcanada.com.
- Page 3 Important safety instructions reassembling can cause electric shock when the product is subsequently used. 13. Do not overload wall outlets and extension cords. When using your telephone equipment, basic safety 14. Unplug this product from the wall outlet and refer precautions should always be followed to reduce the servicing to an authorized service facility under risk of fire, electric shock and injury, including the...
- Page 4 Pacemaker patients 19. For pluggable equipment, the socket outlet shall be installed near the equipment and shall be • Should keep wireless telephones at least six inches easily accessible. from the pacemaker. • Should NOT place wireless telephones directly over CAUTION: Use only the batteries the pacemaker, such as in a breast pocket, when it is indicated in this manual.
- Page 5 à sol humide ou sous la douche. la clientèle de VTech dans les cas suivants: 6. Ne déposez pas ce téléphone sur un chariot, •...
- Page 6 Pile fuite de gaz à proximité de la fuite. En certaines circonstances, une flammèche pourrait être provoquée lorsque l’adaptateur est branché à une • N’utilisez que la pile incluse ou l’équivalent. Pour prise de courant, ou lorsque le combiné est déposé commander une pile de recharge, visitez notre sur le socle.
- Page 7 être effectués du combiné sans fil si VTech’s involvement in this program is part of its le socle est débranché ou mis hors tension ou si le commitment to protecting our environment and courant est coupé.
- Page 8 FCC, ACTA and IC regulations requirement: CAN ICES-3 (B)/NMB-3(B). FCC Part 15 FCC Part 68 and ACTA This equipment has been tested and found to This equipment complies with Part 68 of the FCC comply with the requirements for a Class B digital rules and with technical requirements adopted by device under Part 15 of the Federal Communications the Administrative Council for Terminal Attachments...
- Page 9 will be given the opportunity to correct the problem and the telephone service provider is required to inform you of your right to file a complaint with the FCC. Your telephone service provider may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product.
-
Page 10: Table Of Contents
Make, answer, or end a home call Install | Set up What’s in the box Make a home call Connect the telephone base Predial a home call Connect the charger Answer a home call Install the battery End a home call Charge the battery Using a Bluetooth headset to answer a home call... - Page 11 Contents Phonebook | Phonebook entry 30 Bluetooth Add a Bluetooth cell phone Add a phonebook entry Add a Bluetooth headset Review the phonebook entries Review the Bluetooth device list 40 Download/Transfer your cell phone Dial a phonebook entry phonebook entries via Bluetooth Delete a phonebook entry Delete all phonebook entries Connect / disconnect an active...
- Page 12 Announcement Edit a call block list entry Review call block list Record a new outgoing announcement Block unknown calls Record your name for all screening Unblock a telephone number announcements Play your announcement Configure | Settings Delete your annoucement Smart call blocker settings Play your current announcement Set profile of screening with or without caller...
- Page 13 Contents Voicemail settings Delete all block list entries Save a caller ID log entry to block Set speed dial voicemail number 77 list Add and register handset Review block list General product care Answering system settings Taking care of your telephone Set your built-in answering system Avoid rough treatment Avoid water...
-
Page 14: Install | Set Up
Install | Set up • 1 set for VS112/ VS112-17 What’s in the box • 2 sets for VS112-2/ Your telephone package contains the VS112-27 • 3 sets for following items. Save your sales receipt VS112-3/ and original packaging in case it is... -
Page 15: Connect The Telephone Base
Connect the telephone base Connect the charger 12 hrs Install the battery 1. Plug the battery connector securely into the socket inside the handset TIPS battery compartiment. • If you want to mount the base, make • Make sure the battery label THIS sure telephone line pass through the SIDE UP is facing up, as indicated. -
Page 16: Charge The Battery
2. Align the cover flat against the battery • The screen • The battery is • To keep compartment, then slide it upwards shows charged. the battery HANDSET X. charged, until it clicks into place. place it in the handset charger when not in use. -
Page 17: Check For Dial Tone
(HH) and minute (MM). Then wall jack in your home to connect press to choose AM or PM. your VS112, VS112-2, VS112-3, VS112- 3. Press SELECT to save. 4, VS112-17, VS112-27, VS112-37, VS112-47 telephone, or contact your After setting the date and time, the... -
Page 18: Set Up Through Voice Guide - Smart Call Blocker (Before Use)
Set up through voice guide - Smart call time. blocker (before use) Set up through voice guide - Answering After the date and time setting is done system (before use) or skipped, the handset will prompt if After the Smart call blocker setting is done you want to set Smart call blocker. -
Page 19: Install
Install Mount the telephone base Your telephone base is ready for tabletop use. If you want to mount your telephone on a wall, use the provided wall-mount bracket to attach to a standard dual-stud telephone wall-mounting plate. If you do not have this wall-mounting plate, you can purchase one from many hardware consumer electronics... -
Page 20: Overview
Overview • X/DELETE • Press to delete the Telephone base message currently playing. • When the phone is not in use, press twice to delete all previously reviewed messages. • While reviewing the redial list, phonebook, caller ID log, allow list, block list, or star name list, press to delete •... -
Page 21: Handset
VOLUME • • Press the button to page / FIND • Press show all system handsets. phonebook entries HANDSET when the telephone is not in use. Handset • Press to scroll up while in a menu. • Press to increase the listening volume when on a call, or increase the message playback... - Page 22 • Press and hold to set • While reviewing a caller and turn on the QUIET entry, press mode, or turn it off. repeatedly to add or QUIET # • When reviewing remove 1 in front of caller ID log entry, press the telephone number repeatedly to view other before dialing or saving...
-
Page 23: Display
• Answering system is BOT PO MSG# • Number of new/old 5/10 messages recorded. • The ECO Charging pole mode activates automatically to reduce power Display consumption when the handset is within range of the HANDSET telephone base. Handset lights ANS ON •... -
Page 24: Operating Range
Operating range This cordless telephone operates with the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and telephone base can communicate over only a certain distance which can vary with the locations of the telephone base and handset, the weather, and the layout of your home or office. -
Page 25: Operate
Operate End a cell call Make, answer or end a cell Press , or put the handset in the telephone base or charger. call NOTES Make a cell call • The handset displays Unable to call if 1. Press on the handset. The your cell phone is in use. -
Page 26: Answer A Home Call
to insert a dialing pause (a P appears). to dial. View dialing options Answer a home call Although the caller ID log entries may contain 10 digits (the area code plus the 7-digit number), in some areas, you Press or any dialing keys may need to dial only the seven digits, ( 0-9 or or QUIET#). -
Page 27: Option While On A Call
Option while on a call handset to join the call. When you are on a home or cell call • Press or place the handset and speaking to the caller, and you in the telephone base or handset do not want to continue the call, you charger to exit the call. -
Page 28: End An Intercom Call
End an intercom call 3. Your handset shows Intercom to:. Use the dialing keys to enter a handset number (1-5). Your handset shows Press or place the handset back in Calling HS X. The destination handset the telephone base or charger. rings and shows HS X is calling. -
Page 29: Sound
• Only one intercom call can be To silence the handset ringer established at a time. Sound Press or MUTE/DELETE on the handset. The handset screen shows Use speakerphone Ringer muted. During a call, press to switch Find handset between the speakerphone and normal handset use. -
Page 30: Use Phone Menu
Phonebook | Phonebook answering system, on a call (intercom call or outside call), or out of range, entry that handset does not beep when paged. Add a phonebook entry • You cannot use the find handset feature while the telephone base is 1. -
Page 31: Review The Phonebook Entries
• Press to move the cursor to base can review the phonebook at the left or right. time. If another handset tries to enter • Press 0 to add a space. the phonebook, caller ID log or call • Press MUTE/DELETE on the block list, it shows Not available. -
Page 32: Delete All Phonebook Entries
Delete all phonebook entries 3. Press MENU/SELECT to save the number. 1. Press MENU/SELECT on the handset • The screen shows Enter name when in idle mode. briefly and then the current name to scroll to Phonebook, 2. Press of the entry. then press MENU/SELECT. -
Page 33: Redial List
letter is shown. 3. When the desired redial enry • The names appear in alphabetical displays, press to dial order. using the home line, or press For example, if you have the names dial using the cell line. Jennifer, Jessie, Kevin and Linda in your phonebook: - OR - If you press 5 (JKL) once, J and then... -
Page 34: Call Waiting
Call waiting If you subscribe to call waiting service Call waiting on the cell line from your telephone service provider, f you subscribe to call waiting service and someone calls while you are already on a call on the home line, the handset from your cell phone service provider, and someone calls while you are already flashes... -
Page 35: Predial Via Home Call And Cell Call
blocker is applicable to home calls Chain dialing is useful if you wish to only. access other numbers (such as bank account numbers or access codes) from Predial via home call and cell call the phonebook, caller ID log or redial list. -
Page 36: Caller Id
Access the redial list while on a call • Press and hold REDIAL/PAUSE to enter a 3-second dialing pause (a P 1. Press REDIAL/PAUSE. appears). 2. Press or REDIAL/PAUSE until the • Press MUTE/DELETE to erase a desired number displays. digit. -
Page 37: Save A Caller Id Log Entry To Call Block List
number from the caller ID log in the • Press to move the cursor to phonebook. the left or right. • You might need to change how • Press 0 to add a space. • Press MUTE/DELETE on the a caller ID number is saved in the phonebook if the entry does not handset to erase a character. -
Page 38: Dial A Caller Id Log Entry
time. If another handset tries to enter • There is a confirmation tone and the phonebook, caller ID log or call the screen returns to the previous block list, it shows Not available. menu. Dial a caller ID log entry Caller ID memory match If the incoming telephone number 1. -
Page 39: Bluetooth
• All the entries in the caller ID log add new devices. become old (reviewed already). Once your cell phone finds your • Missed calls message disappears. VTech phone ( VTech DECT 6.0 ), press the appropriate key on your Bluetooth cell phone to continue the pairing process. -
Page 40: Add A Bluetooth Headset
You can download cell phone • The display shows Search phonebook entries to your VS112/ headset... VS112-2/ VS112-3/ VS112-4 telephone 4. Set your headset to discoverable system via Bluetooth wireless mode (refer to the user’s manual technology. Each downloaded cell of your headset). -
Page 41: Connect / Disconnect An Active
Entries phonebook, make sure the cell phone added: XXX. Then, the handset is paired, active, and connected to returns to the Bluetooth menu. your VS112/ VS112-2/ VS112-3/ VS112- NOTES 4. Make sure the handset battery is • Cell phone contacts charged for at least 10 minutes. -
Page 42: Auto Bluetooth Connection
Answering system corresponding device light ( and/ ) turns on. Difference between the built-in answering 3. If you need to disconnect a paired system and voicemail service cell phone from the telephone base, Your telephone has separate indicators refer to the user’s manuals of your cell for two different types of voice messages: phone for instructions to disconnect a those recorded on its built-in digital... -
Page 43: Use Your Built-In Answering System
Use your built-in answering system The main differences between them are: New message indication Voicemail Built-in from If XX new messages display on the Category answering telephone handsets, there are new messages in system service the built-in answering system. Messages Messages stored in the are stored... -
Page 44: Turn On Or Off The Answering System
Playback messages Telephone base ringer volume while adjusting. Speaker volume level of the You can listen to messages at the telephone base while adjusting. telephone base or on a cordless handset. When playback begins, the total number Turn on or off the answering system of messages is annouced. -
Page 45: Delete All Messages
Delete all messages • Press to stop the playback. Using the base To listen to messages at the handset 1. Press in idle mode. The 1. Press MENU/SELECT on the handset telephone announces, “To delete all in idle mode. old messages, press DELETE again.” 2. -
Page 46: Call Intercept While Using Answering System
remote access code (19 is the default call ends automatically. code). • If the memory is full, the answering • The system automatically system answers after 10 rings and announces the number of new or announces, “Memory is full. Enter old messages (if any), and then the remote access code.”... -
Page 47: Turn On Or Off The Call Screening
Turn on or off the call screening • Press to switch between speakerphone mode and handset Use this feature to choose whether mode. incoming messages can be heard over the telephone base when they are being • Press to answer the call. recorded. -
Page 48: Announcement
Announcement 2. Press to scroll to Screening annc, and then press MENU/SELECT. Your outgoing announcement plays 3. Press MENU/SELECT to select Rec your when calls are answered by the answering name. The system announces,“Record system. The telephone has a default after the tone. -
Page 49: Play Your Current Announcement Of Screening With Or Without Caller Name
4. The screen displays Play [2] Del [3] Rec 3. Press to scroll to Play annc, then [7] and it announces, “To play, press press MENU/SELECT. 2. To record, press 7.” Press 3 to delete 4. Press MENU/SELECT again to select your recorded announcement. -
Page 50: Reset All Your Screening Announcements
Voicemail (via Tlephone Calls to this number are being screened by Smart call blocker. If you’re a family service provider) member, friend or invited caller, please press pound to be connected. If you’re a When you received a voicemail, the solicitor, please hang up now.”... -
Page 51: Activate And Use Cell Phone's
If you have connected a cell phone to your cell phone that you will be the VS112/ VS112-2/ VS112-3/ VS112- sending your voice commands, 4 telephone system, you can activate such as GPS, e-mail and social the voice-controlled application (voice networking accounts. - Page 52 Activate remote voice control NOTES 1. Press VOICE/CALL BLOCK on the • Once you have activated the remote handset. voice control feature, you are using • If you have connected one cell your cell phone’s voice app to operate phone to the telephone, the your cell phone.
-
Page 53: Smart Call Blocker
Smart call blocker phone’s prompt in time, the handset screen will return to idle, and the icon will disappear. You can restart Turn on or off Smart call blocker by following Steps 1-3 mentioned above. The Smart call blocker feature is set to •... -
Page 54: Allowed Calls
Blocked calls Allowed calls If Smart call blocker is on, incoming home If Smart call blocker is on, the following or cell calls with numbers saved in your types of incoming calls can get through to block list will not ring. The telephone you and ring on your telephone system. -
Page 55: Screen Unknown Home Calls
an unknown number remotely. asks whether you want to answer or reject the call, or to forward the call to the answering system. Screen unknown home calls NOTES If Smart call blocker is on, and you have • You can set Smart call blocker to set profile to screen unknown home screen and filter all unknown home calls, the telephone plays a screening... - Page 56 announcing the caller’s name, you screening announcement. This allows you to access your answering system can press to mute the ringer. from an unknown number remotely. • After you picked up a screened home call and the telephone is announcing the screening options, you can press to hang up the call.
-
Page 57: Screen Robocalls
messages, for example, robocalls and Screen robocalls telemarketing calls. If Smart call blocker is on, and you have set profile to screen robocalls, NOTES the telephone plays a screening • The telephone announces to the announcement to the caller when caller with “Hello. -
Page 58: Screened Call Options
Screened call options block list or allow list. It also checks whether the caller name is in After the telephone screen a home call the star name list. After that, The and starts ringing, the handset screen telephone then displays the caller displays Screened call. -
Page 59: Block Calls | Call Block List
Block calls | Call block list NOTES • For home calls that are “out of area”, Add a call block entry “Private”, or without caller ID, only 1. Press MENU/SELECT to enter the options 1 and 4 will be available. main menu when it is not in use. -
Page 60: Edit A Call Block List Entry
name, use the dialing keys to enter a • Press MUTE/DELETE on the name (up to 15 characters). Press a key handset to erase a digit. • Press and hold MUTE/DELETE to repeatedly until the desired character appears. The first character of every erase all digits. -
Page 61: Block Unknown Calls
Configure | Settings Block unknown calls 1. Press MENU/SELECT to enter the Smart call blocker settings main menu when the handset is not in use. Set profile 2. Press p/q to scroll to Smart call There are five profile setting options, blk, then press MENU/SELECT. -
Page 62: Set Smart Call Blocker Through Voice Guide
• Allow unknown (default setting) with these caller names to allow their - allow all unknown home calls to calls to get through to you. ring, except calls with numbers Set Smart call blocker through voice saved in the block list. •... -
Page 63: Star Name Entry/ List
Star name entry/ list only. All incoming cell calls will get through and ring. If you want to Add a star name entry block a cell call, add the number to Block list). the block list. (See There are many organizations like schools, medical offices, and pharmacies •... -
Page 64: Delete A Star Name Entry
Delete all star name entries handset or X on the telephone base to erase a character. 1. Press MENU/SELECT to enter the main • Press and hold MUTE/DELETE on menu when the handset is not in use. the handset or X on the telephone Then, press p/q to scroll to Smart base to erase all characters. -
Page 65: Save A Caller Id Log Entry To Star Name List
Allow entry/ list Save a caller ID log entry to star name list Add an allow entry 1. Search for the desired caller ID log Add numbers that you want to allow entry. their calls to get through to you. The 2. -
Page 66: Delete An Allow Entry
name (up to 15 characters). Press a key MENU/SELECT. repeatedly until the desired character 3. Press p/q to highlight Delete appears. The first character of every all, then press MENU/SELECT. The word is capitalized. handset shows Delete all?. • Press p/q to move the cursor to 4. -
Page 67: Edit An Allow Entry
the left or right. the name. • Press 0 to add a space. • The screen displays Enter name • Press MUTE/DELETE on the along with the name to be handset or X on the telephone edited. base to erase a character. 5. -
Page 68: Block Entry/ List
Block entry/ list name, use the dialing keys to enter a name (up to 15 characters). Press a key Add a block entry repeatedly until the desired character appears. The first character of every Add numbers that you want to prevent word is capitalized. -
Page 69: Delete All Block List Entries
• Press p/q to move the cursor to 2. Press p/q to scroll to Block list. the left or right. Press MENU/SELECT. • Press MUTE/DELETE on the 3. Press p/q to highlight Delete handset or X on the telephone all, then press MENU/SELECT. The base to erase a digit. -
Page 70: Review Block List
Review block list 5. To edit the name: • Press p/q to move the cursor to 1. Press MENU/SELECT to enter the main the left or right. menu when the handset is not in use. • Press 0 to add a space. Then, press p/q to scroll to Smart •... -
Page 71: Set Answering System Through Voice Guide
of messages and F flash, alternatively, NOTES in the message window, and Rec mem • You can press on the handset full appears on the handset screen. You to quit the voice guide at any time. must delete some messages before •... -
Page 72: Tone
Turn on or off the message alert tone a call from the caller ID log. If you dial 10 digits to make a local phone call, do not When the message alert tone is set use this home area code feature. to On, and there is at least one new If you do, you cannot place local calls message, the telephone base beeps... -
Page 73: Dial Modes
Dial modes service only, refer to Temporary tone dialing to temporarily switch from Temporary tone dialing pulse to touch-tone dialing during a If you have pulse (rotary) service only, call. you can switch from pulse to touch- Ringer tone dialing temporarily during a call. This is useful if you need to send touch- Set ringer tone tone signals to access your telephone... -
Page 74: Adjust And Turn Off The Ringer Volume
Adjust and turn off the ringer volume the ringer volume. You can select the ringer volume for When you set the ringer volume to zero, incoming home and cell calls. the base ringer is off and the system announces, “Base ringer is off.” Adjust the ringer volume on home line 1. -
Page 75: Set Languages
Sound settings keys. 4. Enter the day using the dialing keys. Set number of rings 5. Enter the year using the dialing keys, You can set the answering system to then press MENU/SELECT to move answer an incoming call after two, three, on to set the time. -
Page 76: Set Quiet Mode
Set QUIET mode saving the setting. • After QUIET mode is turned off or When QUIET mode is turned on, the the set period of time has expired, telephone silences all sounds during the all muted features will be activated set period of time (1-12 hours). -
Page 77: Voicemail Settings
3. Press p/q to highlight Key tone, 27/VS112-37/VS112-47 handsets then press MENU/SELECT. (purchased separately) to your VS112/ VS112-2/VS112-3/VS112-4 telephone 4. Press p/q to select On or Off. system. Your telephone system 5. Press MENU/SELECT to confirm. supports a maximum of 5 handsets. -
Page 78: General Product Care
General product care If registration fails, Registration failed appears on the handset screen. The handset shows To register HS, see Taking care of your telephone manual and the telephone base returns Your cordless telephone contains to idle mode. This may take up to five sophisticated electronic parts, so it must minutes to occur. -
Page 79: Technical Specifications
Technical DECT 6.0 digital technology specifications The VTech DECT 6.0 products offer unsurpassed range performance and sound clarity. This Frequency • Crystal controlled PLL is achieved through a unique antenna control synthesizer design and advances in noise-filtering • Handset: 1921.536-1928.448 Transmit technology. -
Page 80: Simulated Full-Duplex Handset
Frequently asked Simulated full-duplex handset and base speakerphones questions The simulated full-duplex speakerphone on your handset and telephone base Below are the questions most frequently allow both ends of asked about the cordless telephone. a call to speak and be heard at the same If you cannot find the answer to your time. - Page 82 The limited warranty period for the Product extends systems outside the unit. for ONE (1) YEAR from the date of purchase. If VTech replaces a Materially Defective Product under the How do you get warranty service?
- Page 83 In no event shall VTech assumes no risk for damage or loss of the VTech be liable for any indirect, special, incidental, Product in transit. If the Product failure is not covered...
- Page 84 (US) to register Go to your product for enhanced warranty support and the latest VTech product news. Go to phones.vtechcanada.com (Canada) for the latest VTech product news. Specifications are subject to change without notice. © 2021 VTech Communications, Inc.