VTech vsp600 Configuration Manual

How to configure Vtech VSP600 Cordless Phone:
To begin configuring your Vtech for use on Intermedia's Network, you will need to pull up the graphical
user interface.
Obtain the Credentials for the device in HostPilot:
1. Login to HostPilot.
2. Navigate to Services>Voice Services.
3. Choose Numbers&Extensions Tab.
4. Click on the phone number of the device.
5. Navigate to SIP configuration
To Pull the IP of the phone, there are two ways:
On the phone:
1. Press the Softkey button for Menu on the phone
2. Scroll down to 'Status' and hit the Center button [Select]
3. Press [Select] for 'Network' or press the [Enter] soft key
4. The IP of the phone should now be displayed
Via Netscan:
1. Run Netscan
2. Find the MAC of the phone in the scan and look at the associated IP
Once you find the IP address, input that into any Web Browser, you will be met with a login pop-up.
The default credentials are:
At this point we're ready to configure this SIP phone.
1. Click on System across the horizontal Black bar
Click on 'Account 1' under SIP Account Management on the left-hand Pane.
admin/admin (after factory reset, username and password are user/user)