VTech VS150 TWIN User Manual page 44

Edit numbers for remote calls:
You can add, edit, or delete a telephone number for remote calls.
1. Press MODE
telephone base when idle.
2. Press or
CALLS /
telephone base to scroll to choose
Remote, and then press OPTIONS.
3. Press SELECT
number.
4. Press or
CALLS /
telephone base to scroll to the desired
slots (1, 2, or 3), and then press SELECT.
5. Use the dialing keys to enter the number.
SAVE
6. Press
Set time delay for remote calls:
You can choose to set an exit or entrance
delay time for the remote calls, so that
when a sensor is triggered when you exit
or enter your home within the delay time,
you will not receive the unnecessary
remote call.
For example, when you are about to leave
home, you can set the exit delay time to
5 minutes. Once the delay is set, you will not
receive a remote call even when you open
the door within those ive minutes.
As for the entrance delay time, if you set it
to 1 minute, you will receive the remote call a minute after opening
the door as you come home, unless you press
choose Local mode, or press DISARM on the handset or telephone
base within that minute.
If you want to be notiied immediately whenever a door is opened,
we recommend you to set it as 0 minutes.
on the handset or
on the handset, or
or PHONEBOOK/ on the
to select Set tel
on the handset, or
or PHONEBOOK/ on the
to save.
MODE
34
and then