Quiet Mode; Flash Time - VTech VS150 TWIN User Manual

QUIeT mODe

You can turn on the quiet mode for a period of time. During this
period, all tones (except paging tone and alert tone) and call
screening are muted. When you turn on the quiet mode, the
answering system turns on automatically.
1. Press and hold
telephone base when idle.
2. Use the dialing keys (0-9) to enter the
duration, and then press
NOTES
To turn off the quiet mode, press and hold
on the handset or telephone base when idle.
•
Sensor alert tone and announced alert will
not be silenced in quiet mode.
•

flaSH TIme

The lash time is preset to 100ms. If you want to lengthen the lash
time, you can change the lash time settings. Be sure to check with
your service provider before make any change.
1. Press MENU on the handset or telephone base when idle.
2. Press or
on the telephone base to scroll to Phone setup, then press
SELECT.
3. Press or
on the telephone base to scroll to Flash time, then press SELECT.
4. Press or
on the telephone base to scroll to 80ms, 100ms, 120ms, 180ms,
200ms, 250ms, 300ms, or 600ms, then press SELECT. There is a
confirmation tone and the screen returns to the previous menu.
on the handset or
SELECT
on the handset, or CALLS / or PHONEBOOK /
on the handset, or CALLS / or PHONEBOOK /
on the handset, or CALLS / or PHONEBOOK /
to save.
51
BACK