Default Announcement; Record Your Own Announcement - VTech VS150 TWIN User Manual

Using the handset:
Press MENU when the phone is not in use.
1.
2. Press or
SELECT.
3. Press or
SELECT.
4. Press or
save. You hear a conirmation tone.

DefaUlT aNNOUNCemeNT

The telephone is preset with a greeting that answers calls with
"Hello, please leave a message after the tone." You can use this
preset announcement, or replace it with your own.

ReCORD YOUR OwN aNNOUNCemeNT

You can use the preset announcement to
answer calls, or replace it with your own
recorded announcement. It can be up to
90 seconds in length.
Press MENU on the handset or
1.
telephone base when idle.
2. Press or
CALLS / or PHONEBOOK /
on the telephone base to scroll to
Answering sys, and then press
SELECT.
SELECT
3. Press
Announcement.
SELECT
4. Press
5. The handset or telephone base announces "Record after the
tone. Press STOP when you are done." After the tone, speak
towards the microphone. Press
to scroll to Answering sys, and then press
to scroll to Answer ON/OFF, and then press
to scroll to On or Off, and then press
on the handset, or
to select
to select Record annc.
STOP
when done.
74
SELECT
to