VTech VS150 TWIN User Manual page 35

mOUNT THe SeNSOR UNIT
Mount with tape
1. Attach the mounting tape
B onto the rectangular
area at the rear side of the
back cover
2. Stick the sensor unit onto
the frame.
-OR-
Mount with screws
1. Press the latch button on
the sensor unit to open
the battery compartment
case.
2. Use a pencil to mark two
holes on the desired
location on the frame,
with the aid of the two
holes on the back cover
of the sensor unit. Then,
remove the back cover
and drill two holes into
the frame.
3. Align the holes on the
back cover with the holes
on the frame. Tighten
the small screws into the
holes to secure the back
cover onto the frame.
4. Push the battery
compartment case back
onto the mounted back
cover until it securely
clicks into place.
Without Spacer
25
B B