Set A Time Range For Alerts - VTech VS150 TWIN User Manual

SeT a TIme RaNge fOR aleRTS

You can choose to receive an announcement alert - "Sensor X is
open" or "Motion X sensor detected motion", when a monitored
garage door or contact sensor is opened, or when there is motion
in the monitored area, during a preset time period of the day.
For example, you can set to receive alert only from 10pm to 6am
during bedtime.
You can also set a reminder in case you forget to close the
monitored object. You can also choose to receive an alert once
again if it remains open after 5, 10, or 20 minutes.
SENSORS
1. Press
and then scroll to the desired sensor.
-OR-
i. Press MENU when the phone is not in use.
ii. Press
PHONEBOOK/ on the telephone base to scroll to Sensors,
and then press SELECT.
iii. Press
PHONEBOOK/ on the telephone base to scroll to the
desired sensor, and then press SELECT.
OPTIONS
2. Press
SELECT
3. Press
4. Press or
on the telephone base to scroll to choose Time range, and then
press SELECT.
• If time range has been set previously, press
5. Use the dialing keys (0-9) to enter the hour and minute for the
start time. Scroll to choose AM or PM, and then press NEXT.
6. Use the dialing keys (0-9) to enter the hour and minute for the
end time. Scroll to choose AM or PM, and then press SAVE. The
reminder menu appears.
7. Press or
the telephone base to scroll to choose Off, 5 minutes,
1 0 minutes, or 2 0 minutes, and then press
NOTE
• Suppose you have set the time range from 10pm to 6am. When the time
reaches 10pm, you will receive the alert once if the garage door or
contact sensor is already open.
on the handset or telephone base when idle,
on the handset, or CALLS /
or
or on the handset, or CALLS /
to enter the individual sensor menu.
to select Set schedule.
on the handset, or CALLS /
on the handset, or CALLS /
or PHONEBOOK/
orPHONEBOOK/ on
38
or
or
EDIT
to edit.
SELECT
to save.