Remote Access Code; Message Alert Tone - VTech CS6629-2 User Manual

Answering system settings

Remote access code

A two-digit security code is required to access the answering
system remotely from any touch-tone telephone. The preset code
is 19. You can set the code from 00 to 99.
Press MENU when the phone is not in use.
1.
to scroll to Answering sys, then press SELECT.
2. Press or
to scroll to Ans sys setup, then press SELECT.
3. Press or
to scroll to Remote code, then press SELECT.
4. Press or
5. Use the dialing keys (0-9) to enter a two-digit number,
or press or
Then press SELECT to confirm your selection. You hear a
confirmation tone.

Message alert tone

When the message alert tone is set to on, and there is at least one
new message, the telephone base beeps every 10 seconds.
To turn this feature on or off:
Press MENU when the phone is not in use.
1.
to scroll to Answering sys, then press SELECT.
2. Press or
to scroll to Ans sys setup, then press SELECT.
3. Press or
to scroll to Msg alert tone, then press SELECT.
4. Press or
to choose Tone: On or Tone: Off, then press
5. Press or
SELECT to confirm your selection. You hear a confirmation tone.
• The answering system must be turned on for the message alert
tone to be functional.
Press any key on the telephone base (except /FIND HANDSET)
•
to temporarily silence the message alert tone.
to scroll to a desired two-digit number.
45
Ans sys setup
ECO
Remote code
ECO
Remote code
19
ECO
Ans sys setup
ECO
Msg alert tone
ECO
Tone: Off
ECO