Set Alert Schedule As Always On - VTech VS150 TWIN User Manual

SeT aleRT SCHeDUle aS alwaYS ON

The default setting of sensors' alert
schedule is Always on. You will receive an
announcement alert - "Sensor X
*
or "Motion X
every time a monitored garage door
or contact sensor is opened, or there is
motion in the monitored area.
You can also set a reminder in case you
forget to close the monitored object. You
can choose to receive an alert once again if
it remains open after 5, 10, or 20 minutes.
SENSORS
Press
1.
and then scroll to the desired sensor.
-OR-
i. Press MENU when the phone is not in use.
ii. Press
PHONEBOOK/ on the telephone base to scroll to Sensors,
and then press SELECT.
iii. Press
PHONEBOOK/ on the telephone base to scroll to the
desired sensor, and then press SELECT.
2. Press OPTIONS
3. Press SELECT
4. Press SELECT
5. Scroll to choose Off, 5 minutes, 1 0 minutes, or 2 0 minutes,
and then press
NOTES
•
When you received the alert tone and announcement, the handset
will display Sensor X is open or Motion X detected motion, whilst
the telephone base will display Sensor X is open or Motion X sensor
detected motion.
•
For garage door sensor and Contact sensor, both the handset and
telephone base will also display
telephone base will turn red.
*
Sensor X or Motion X refer to the sensor's name.
X refers to the system-assigned number of the sensor. You can edit the
sensor's name to your preferred name. See Rename the sensor.
sensor detected motion",
on the handset or telephone base when idle,
or on the handset, or CALLS /
on the handset, or CALLS /
or
to enter the individual sensor menu.
to select Set schedule.
to select Always on. The reminder menu appears.
SELECT
to save.
*
is open"
, and the SENSOR light on the
37
L
Open/closed 1
Set schedule
or
or