TeST SeNSOR SIgNal STReNgTH
Before you mount the sensor, follow the instructions below to
check the signal strength between the sensor and the telephone
base. Make sure you mount the sensor in a location where the
signal strength is good.
Using a handset:
1.
Press MENU on the handset when idle.
2.
Press
or
CALLS /
telephone base to scroll to Sensor
setup, and then press SELECT.
3.
Press
or
CALLS /
telephone base to scroll to Check
signal, and then press SELECT.
4.
Press
or
CALLS /
telephone base to scroll to the sensor
you want to test, and then press
SELECT.
The screen displays Test signal strength between base and
5.
sensor. Press NEXT. The screen displays Awaiting signal.
Please wait....
The screen displays Please trigger your sensor now.. Trigger
6.
your sensor (refer to Installation Guide), and then press NEXT.
If the screen displays No signal. Please try again.. Press OK,
•
and then return to step 3 to test again.
If the screen displays Weak signal Move sensor closer to
•
base., adjust the sensor's location to improve the signal, and
then press NEXT.
7. When the screen displays Good signal. Good location for
sensor.. Press OK. The testing is complete.
on the handset, or
or PHONEBOOK/ on the
on the handset, or
or PHONEBOOK/ on the
on the handset, or
or PHONEBOOK/ on the
41
L
Open/closed 1
Set schedule