Table of Contents
Advertisement
Optimum installation layout
The DHT-FS3 can reproduce a realistic 5.1-channel surround sound for enhanced sense of presence using
just the front speaker unit and the subwoofer.
Ideal layout examples
<Installed flat against a wall>
Installation tips
Installing as shown below provides a better surround effect.
• Listen from a distance of at least 1 meter from the front speaker unit.
• Keep the front speaker unit away from the left and right walls.
• When mounting in a TV rack, use with the door opens.
NOTE:
• Do not place any heavy objects (TV, etc.) on top of the DHT-FS3.
• The size of the room, the distance between the DHT-FS3 and the listening position, etc., can be set using
the "ROOM" option in the "Detailed settings" (vpage 11).
Connecting the front speaker unit and subwoofer
Use the exclusive connection cable to connect.
<View from the bottom>
<Installed in a corner>
Changing the speaker connection cable
The included connection cable can be replaced, for example if you want a longer cable.
q Pressing the release button on the opposite side
from lock lever, pull the cable out of the plug.
w Peel off the sheathing from the tip of the new
cable and twist tightly so that the tip is not
frayed.
0.03 ft /
10 mm
NOTE:
• Speaker connection cables of up to 1.2 mm in thickness can be connected to the DHT-FS3's speaker
ENGLISH
E
To
disconnect
the
b
plug, press down on
the lock lever and
pull.
Lock lever
Lock lever
Release button
terminal.
ENGLISH
<Close-up>
NOTE:
• Be sure to insert the connection cable's plug
fully to the hilt. Incomplete connections will
cause noise or operating problems.
e Pressing the release button, insert the cores into
the plug, matching the cable's + and – polarities
with the + and – sides on the plug.
Release button
r Release the release button and gently pull on
the cable to check that it is secure.
Hide quick links:
Advertisement
Table of Contents
