Turning The Redirect Ring For A Telephone On Or Off - Nortel P0857846 System Coordinator Manual

76 / Forwarding your calls
6. Press CHANGE to select Y (Yes) or N (No).

Turning the redirect ring for a telephone on or off

You can program a telephone to ring briefly (200 milliseconds) when
a call is redirected on one of its lines.
You will need the programming template found at the front of this
guide. See Getting Started for more information. ƒ••¤flfl‹››
1. Press ¤‹fl›fl
2. Press
password). ≠
3. Press
you wish to program. ≠
4. Press "
5. Press
ring:.
6. Press CHANGE to select Y (Yes) or N (No).
Tip -
rings briefly for redirected calls on one of its lines
even if another telephone set up the line
redirection.
Displays while redirecting lines
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
(the default System Coordinator
and enter the internal number of the telephone
twice.
three times. The display shows Redirect
If a telephone has redirect ring enabled, it
You selected the intercom button as the
facility to place the call on. Enter a line pool
•
code or a destination code.
£
Press
or
REMOVE
redirection.
You have one external line on your
telephone, but you need a second line to
perform line redirection. Redirect your
external line using a line pool as the outgoing
line.
.
or ADD to begin redirection. Press
to cancel a previous
P0857846 Issue 02