Nortel P0857846 System Coordinator Manual page 27

14 / Frequently used programming operations
Use numbers for the months: 01 is January; 12 is December.
The clock also controls the schedules used for services such as ringing
and routing services.
After a power failure, the clock will be behind by the length of time
power was lost. For example, if the power is out for two minutes, the
clock will be two minutes behind.
Your Norstar system can change automatically between North
American daylight saving and standard time. This option is set by your
customer service representative or installer and can be changed by
contacting them.
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
Press NEXT .
Press .
CHANGE
Press the dial pad buttons to enter the year.
Press NEXT .
Press .
CHANGE
Press the dial pad buttons to enter the month.
Press .
NEXT
Press CHANGE .
Press the dial pad buttons to enter the day.
®
Press to end your session.
P0857846 Issue 02