Nortel P0857846 System Coordinator Manual page 90

Displays while canceling redirection
For other displays, see "Common feature displays" on page 149.
P0857846 Issue 02
You are attempting to redirect a line and the
line you have chosen is the outgoing line you
have selected as a destination. You cannot
redirect a line to itself. Select another line.
Enter a valid line pool access code.
You have attempted to redirect a line, but
•
someone else has already redirected that
line. Press or OVERRIDE
previous redirection and redirect the line as
you wish.
You have attempted to redirect calls on an
incoming line group. You can only redirect
calls on individual lines and you cannot
redirect calls on an incoming line group.
Select the line that will be used to redirect
calls out of the system.
Press the lines to be redirected. To undo a
line selection, press it again. Press
redirect all your lines.
˙
Continue to press the lines to be redirected.
Press or
finished.
The line you are attempting to redirect
cannot be redirected because the hardware
does not support redirection.
Press the lines that are no longer to be
redirected. The lines light up as you press
them. Once you cancel redirection for a
line you cannot restore it by pressing the
line again. Press ALL
˙
for all your lines. When you are finished,
press or
Continue to press the lines that are no
longer to be redirected. Press
or OK when you are finished.
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
Forwarding your calls / 77
to override the
ALL
OK when you are
to cancel redirection
OK .
˙
to