Using Saved Number Redial - Nortel P0857846 System Coordinator Manual

60 / Time savers for making calls
For other displays, see "Common feature displays" on page 149.

Using Saved Number Redial

You can save the number of the external call you are on (provided
you dialed the call) so that you can call it again later. Each telephone
can save one number at a time with Saved Number Redial, not one
number for each line.
Tip -
button using Saved Number Redial.
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
Enter the telephone number you wish to
program exactly as you would if you were
˙
dialing it normally. When you are finished,
press
You have entered a code outside the code
range (01-70 for system, 71-94 for personal).
There is no number stored on the speed dial
code you have dialed.
If you want to program a line or line pool
selection for this speed dial number, select
the line or line pool. Otherwise, enter the
telephone number exactly as you would if
you were dialing it normally. When you are
finished, press
If you want to program a line or line pool
selection for this speed dial number, select
the line or line pool. Otherwise, enter the
telephone number you wish to program
exactly as you would if you were dialing it
normally. When you are finished, press
There is no line associated with the speed
dial number you are trying to use. Select a
free external line or line pool and enter the
speed dial feature code again.
The system cannot dial the number stored.
Reprogram the number.
You can copy a number onto an autodial
or .
OK
˙
.
ƒfl‡
P0857846 Issue 02
OK .