120 / Using System features
•
Manual allows you to turn the service on and off at any time from
a control telephone using a feature code.
•
Automatic allows you to use the preassigned stop and start time
for a service. You are still able to start and stop the service by
entering the appropriate feature code at a control telephone. If
you select this setting, you will use the start and stop times
programmed by your installer or customer service
representative.
•
Off prevents the service from being activated.
You will need the programming template found at the front of this
guide. See Getting Started for more information.
ƒ••¤flfl‹››
1. Press
¤‹fl›fl
2. Press
password).
'
3. Press
≠
4. Press
'
5. Press
≠
6. Press
want to program.
≠
7. Press
work best for your office: Off, Manual or Automatic.
Each schedule can have its own configuration of a Service which
works independently of automatic start and stop times. For example,
there may be a version of Restriction service called Night Schedule
that prevents anyone from making long distance calls. But calling it
Night Schedule does not mean it can only be used with a schedule.
You can turn the Night Schedule for Restriction Service on or off as
needed any time of the day or night. If you decide to run a service
on a schedule, the system will use the start and stop times used for
that schedule.
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
(the default System Coordinator
twice.
at Services.
until you see the Service you want to program.
'
and
until you see the schedule you
and use CHANGE to select the setting that will
.
P0857846 Issue 02