Canceling A Transfer - Nortel P0857846 System Coordinator Manual

66 / Transferring calls
When transferring an external call to an external number, the
external call you are trying to transfer must be an incoming call on a
disconnect supervised line.
While on a conference call, you can remove yourself from the
conference and connect the other two callers using the Transfer
feature. However, if both of the other people are from outside the
system, at least one of the outside callers must have called you and
both of the outside calls must be on disconnect supervision lines.
In certain situations, you may experience lower volume levels when
transferring an external call to an external person, or when
transferring two external callers from a conference call.

Canceling a transfer

You can reconnect to the person you are trying to transfer at any
time before the transfer is complete.
ƒ£‡‚
• Press
• If you are not reconnected to your original call, press
then press the line key of the original call, which is now on hold.
Displays
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
or CANCL.
You are talking to the person you want to
transfer the call to. Press
®
to transfer the call to someone else. Press
or JOIN to transfer the call.
The person to whom you tried to transfer a
call did not answer. Press
flashing line button to reconnect to the call.
On the M7100 telephone, lift the receiver.
The person to whom you tried to transfer a
call has Do Not Disturb active on their
telephone. Press JOIN
anyway. Press
RETRY
someone else. Press
line button to reconnect to the call (on the
ƒ£‡‚
M7100 telephone, press
®
and
RETRY if you decide
or the
CALLBACK
to transfer the call
to transfer the call to
CANCL or the flashing
).
P0857846 Issue 02