Customizing your telephone
Finding out what a button does using Button
Inquiry
You can check the function of any line, intercom, or programmed
button on your Norstar telephone by pressing
the M7100 telephone Button Inquiry shows your internal number
followed by the function assigned to your single memory button.
Displays
For other displays, see "Common feature displays" on page 149.
Making the display darker or lighter using
Contrast adjustment
ƒ•‡
•
Press
•
Press a number on the dial pad to choose the contrast level you
like best.
On a two-line telephone, you can also use the UP and DOWN display
buttons to adjust the contrast.
P0857846 Issue 02
The display shows the number and name of
the line. Press
SHOW
£
status of the line.
Press
or press
VIEW‚
˙
number that is too long to fit on the display.
Press
or OK when you are done.
The display shows the directory number of
the telephone, and the assigned name.
Press
NEXT
to see the first line assigned to
ring at the intercom button.
The name of the feature assigned to a button
£
is displayed when you press the button.
Press
or
SHOW
for additional information.
ƒ
Press the button you want to check. Press
or
EXIT
when you are finished.
.
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
ƒ•‚
ƒ•‚
. On
to view the redirection
or
to view a
·VIEW
ƒ•‡