MAINTENANCE WORK ON FRAME AND ENGINE
Installing the oil filter
x
9.64
Cleaning the oil screens
9.65
Warning
Danger of scalding Engine oil and gear oil get very hot when the motorcycle is ridden.
–
Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.
–
Remove screws
–
Pull oil filter
Circlip pliers reverse (51012011000)
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing area.
700104-01
–
Insert oil filters
–
Oil the O-rings of the oil filter covers. Mount oil filter covers
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover
700105-01
x
. Remove oil filter
with the O-ring.
out of the oil filter housing.
and
.
and
.
M5
6 Nm (4.4 lbf ft)
118