MAINTENANCE WORK ON FRAME AND ENGINE
Installing the front wheel
9.25
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
–
Loosen screws
–
Unscrew screw
dle out of the fork stub. Remove screw
Warning
Danger of accidents Reduced braking efficiency caused by damaged brake
discs.
–
–
Holding the front wheel, withdraw the wheel spindle. Take the front wheel out of the
601009-10
fork.
x
–
Clean and grease the thread of the wheel spindle and screw
Long-life grease (
–
Lift the front wheel into the fork, position it, and insert the wheel spindle. Mount and
tighten screw
Guideline
Screw, front wheel spindle
–
Position the brake caliper and check that the brake linings are seated correctly.
601010-10
–
Position spacers
and
.
about 6 turns, press your hand on the screw to push the wheel spin-
Always lay the wheel down in such a way that the brake disc is not damaged.
p. 154)
.
. Mount screws
but do not tighten.
.
.
M24x1.5
40 Nm
(29.5 lbf ft)
77