Changing The Parking Light Bulb - KTM 690 Supermoto Limited Edition EU 2009 Owner's Manual

MAINTENANCE WORK ON FRAME AND ENGINE

Changing the parking light bulb

9.44
Note
Damage to reflector Reduced luminance.
–
Grease on the bulb will evaporate due to the heat and be deposited on the reflector. Clean the bulb and keep it free of grease before
mounting.
–
Take the rubber cap off the headlight bulb.
–
Turn the bulb holder
–
Take the headlight bulb out of the headlight housing.
–
Insert a new headlight bulb into the headlight housing.
Headlight (H4 / P43t socket) (
Info
Insert the headlight bulb so that the bayonet lugs
100157-10
–
Position the bulb holder and turn it clockwise all the way.
–
Replace the rubber cap.
–
Refit the headlight mask with the headlight. (
–
Switch off all power consumers and the engine.
–
Remove the headlight mask with the headlight. (
about 30° counterclockwise and remove it.

p. 142)
p. 96)
latch into the slots
 
p. 95)
98
.