Installing The Oil Filter; Installing The Rotor - KTM 1190 RC8 EU 2008 Repair Manual

30/ASSEMBLING THE ENGINE

Installing the oil filter

21.24

Installing the rotor

21.25
– Tilt the engine sideways and fill the oil filter housing to about ⅓ full with engine
oil.
–
Insert oil filter
–
Lubricate the O-ring of the oil filter cover. Mount oil filter cover
–
Mount and tighten the screws.
Guideline
Remaining engine screws
200481-11
–
Turn the free-wheel-gear
200351-10
–
Ensure that the spring washer
–
Mount the rotor.
200352-10
–
Thoroughly clean the oil jet of the rotor screw and blow it out with compressed air.
–
Mount and tighten rotor screw
Guideline
Rotor screw
–
Position freewheel holder
Guideline
Screw, freewheel holder
200348-11
.

M5
counterclockwise and mount it in rotor

is seated properly.

.

M12x1.5
. Mount and tighten the screws.

M6
.

6 Nm (4.4 lbf ft)
.

90 Nm
(66.4 lbf ft)
10 Nm Loctite ® 243™
(7.4 lbf ft)
130