Changing The Turn Signal Bulb - KTM 690 Supermoto Limited Edition EU 2009 Owner's Manual

MAINTENANCE WORK ON FRAME AND ENGINE

Changing the turn signal bulb

9.45
Note
Damage to reflector Reduced luminance.
–
Grease on the bulb will evaporate due to the heat and be deposited on the reflector. Clean the bulb and keep it free of grease before
mounting.
–
Pull the parking light bulb
–
Insert a new parking light bulb in the holder.
Parking light (W5W / socket W2,1x9,5d) (
–
Refit the headlight mask with the headlight. (
100161-10
–
Remove the screw on the rear of the turn signal housing.
–
Carefully remove diffuser
–
Press the turn signal bulb carefully into the socket, turn it counterclockwise by about
30°, and take it out of the socket.
Info
Do not touch the reflector with your fingers and keep it free from grease.
–
Press the new turn signal bulb carefully into the socket and turn it clockwise all the
way.
100160-10
Turn signal light (RY10W / BAU15s socket) (
out of the holder.

p. 142)
p. 96)
.

p. 142)
99