Removing The Front Wheel - KTM 690 Supermoto Limited Edition EU 2009 Owner's Manual

Art. no. 3211364en
Table of Contents

Advertisement

MAINTENANCE WORK ON FRAME AND ENGINE
Note
Danger of accidents Reduced braking efficiency caused by damaged brake discs.
If the brake linings are not changed in time, the steel brake lining carriers grind on the brake disc. The braking effect is greatly
reduced and the brake discs are rendered unserviceable. Check the brake linings regularly.

Removing the front wheel

9.24
Check the brake linings for minimum thickness
Minimum thickness
»
If the minimum thickness is less than specified:
Change the rear brake linings.
Check the brake linings for damage and cracking.
»
If there is wear or tearing:
Change the rear brake linings.
100139-10
x
Jack up the rear of the motorcycle. (
Jack up the front of the motorcycle. (
Remove screws
Press back the brake linings with a light lateral tilting of the brake caliper on the brake
disc. Pull the brake caliper carefully back from the brake disc and hang it to one side.
Info
Do not pull the hand brake lever while the brake caliper is removed.
601011-10
x
x
p. 58)
p. 57)
and spacers
.
.
≥ 1 mm (≥ 0.04 in)
76

Advertisement

Table of Contents
loading

Table of Contents