Table of Contents
Advertisement
TROUBLESHOOTING
Faults
The engine does not turn when the
starter button is pressed
Engine turns only if the clutch lever is
drawn
Engine turns although a gear is
engaged
Engine turns but does not start.
Possible cause
Operating error
Battery discharged
Fuse 1, 2, 3 or 4 is blown
Main fuse burned out
Ignition/steering lock or emergency
OFF switch defective
Defect in safety start system
No ground connection present.
The vehicle is in gear
The vehicle is in gear and the side
stand is folded out
Defect in safety start system
Defect in safety start system
Operating error
Fuse 4 blown
Coupling of fuel hose connection not
connected
Socket connector of wiring harness
oxidized
Defect in fuel injection system
Action
–
Carry out the start procedure. (
–
Recharge the battery.
x
–
Check the cause of discharging.
–
Change the fuses of individual power consumers.
(
p. 93)
–
Change the main fuse. (
–
Have ignition/steering lock or emergency OFF
switch checked.
–
Have the safety start system checked.
–
Check the ground connection.
–
Shift gear to neutral.
–
Shift gear to neutral.
–
Have the safety start system checked.
–
Have the safety start system checked.
–
Carry out the start procedure. (
–
Change the fuses of individual power consumers.
(
p. 93)
–
Reconnect coupling of fuel hose connection.
–
Clean socket connector and treat it with contact
spray.
–
Read the error memory with the KTM diagnostics
tool and correct the fault.
123
p. 43)
(
p. 90)
p. 92)
p. 43)
Advertisement
Table of Contents
