MAINTENANCE WORK ON FRAME AND ENGINE
Removing the seat
9.32
Mounting the seat
9.33
–
Insert the ignition key in the seat lock
–
Lift up the seat at the rear, pull it back and remove from above.
100108-10
–
Suspend the seat on the screw
it forwards. The two projections
–
Push the locking pin
the locking pin locks in place with an audible click.
–
Remove the ignition key from the seat lock.
–
Finally, check that the seat is correctly mounted.
400155-01
and turn it 45° counterclockwise.
, press the rear downwards and at the same time push
must be inserted into the frame.
into the lock housing and push the back of the seat down until
86