Installing The Rear Wheel - KTM 690 Supermoto Limited Edition EU 2009 Owner's Manual

Art. no. 3211364en
Table of Contents

Advertisement

MAINTENANCE WORK ON FRAME AND ENGINE

Installing the rear wheel

9.27
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Remove nut
spindle
Push the rear wheel forwards as far as possible and take the chain off the rear sprocket.
601003-10
Pull the rear wheel and brake caliper support
the brake caliper support to the side.
Warning
Danger of accidents Reduced braking efficiency caused by damaged brake
discs.
Take the rear wheel out of the swing arm.
601001-10
Info
Do not operate the foot brake when the rear wheel is removed.
x
. Remove chain adjuster
.
Always lay the wheel down in such a way that the brake disc is not damaged.
. Holding the rear wheel, withdraw the wheel
together to the rear until you can swing
79

Advertisement

Table of Contents
loading

Table of Contents